Weld Through Primer – A Beginners Guide

Have you ever realized the core reasons behind your coating corruption? Especially after a long period amount of time?

There are many reasons a surface gets unbalanced. Some of them are connected to the surface being over hit with other kinds of stuff often, and that way, it gets corrupt. However, these failures have less probability of happening when your surface is scaled with high-level materials.

Weld Through Primer

The process is simple. Be it carbon steel or any other metals, first spot the places that need welding. Melt those places first, then spray off with weld through primers gas for final coating. After coating it up with zinc properly, the steel is protected.

Therefore, old metals can worsen through such coating and make the steel live a little bit. Keeping all these in our mind, let’s see how we can use the weld by primer thing.

Shall we?

Before We Begin

Learning about something you are about to use is a must, especially when you are new to the product. That is why learning about the product is the first and foremost task.

So What Is Welding Through Primers?

So What Is Welding Through Primers

It is a product used for mating surfaces properly with the rest part. This product contains zinc oxide that can be applied to surface the part around and protect it for a longer period.

The process is more like applying zinc on the steel for better durability and survivability. The research we provided is something you mostly get from repair shop manuals and other repair shop guides. However, there are some parts where you cant use these primers.

As Aluminium, you should avoid using primers on such metals, which is the knowledge you don’t get from those repair shop guides.

A major amount of steel often requires good replacements. Some get damaged and corrupted, resulting in being unusable sooner or later.

We located and researched how to use weld by primer thingy to avoid such outcomes later.

However, to talk about safety and qualities, we’re providing a list of equipment that you need to abide by to make sure everything goes well according to the plan.



Before we jump into the how-to-do steps, we need to understand and acquire the proper gears required. So here we discuss the equipment that is a must for such users.

  1. Gloves for safety
  2. The primer
  3. Screwdrivers
  4. Sprayer

With these in hand, you are all good to go for the next steps. These are the most needed equipment to maintain the safety precaution.

Without these, you can’t optimize and execute coating methods properly. So acquiring them is the first part.

Sometimes you may need to provide extra metal over these parts, too, to do an overlay. The metal may come short, so this process is also necessary.

Size And Price

Another important note while buying these types of products is the size and price part.

Some brands may cost you a huge amount of money in return for such accessories and equipment. However, the quality they provide may also be good, just not what you may seek.

Finding out the one you need is crucial. If you are going for more like professional work, your tools need to be in shape, too, which comes at an expensive rate.

For a small period, it is not necessary to go for an expensive one. Rather the cheap one that also fulfills your needs properly is pretty much preferred by any professional primer users out there.

Weld Through Primer – The Steps To Follow

Weld Through Primers

Applying wax onto a broken surface completes it properly. Just like that, coating steel with primer is also the same. The process and steps you need to follow are also so simple when you have the right equipment.

Therefore just follows the steps given below if you want to learn welding through primer from a basic perspective.

Step 1 – In this process, identify the metals and steel that require welding. Therefore just specifying the corrupted ones out is the first step.

Step 2 – Now, place the steel or metal over the primer. Place it and attach it strongly so that it can’t move.

Step 3 – Then, take out the screwdrivers and pull off any screws if necessary. Take them off to expose the steel part completely.

Step 4 – Use the primer and sprayer to spray on the corrupted or rusty surface and make it seem properly usable again.

Step 5 – Finally, let it cool down.

These are the steps you can follow to make the surface weld nicely and be usable for a longer period. Make sure while doing the steps to find out what challenges you may face.

Ask yourself questions about any part of the process you felt was not operating as you thought it was supposed. After that, read these challenges you might face, and the solution is also provided with it.

Challenges You Might Face

Before we discuss this primer’s step-by-step procedure, some portions need to be covered to get proper knowledge.

Sometimes after the welding part, when metal pieces are attached, some separate portions like lap joints stay unavailable. This happens for a limited amount of time on different primers.

So what to do about these parts?

The solution for these situations is to just direct spray with a weldable primer upon these chosen surfaces.

This spraying makes the welding process stronger. Therefore it is corrosion-free, and the weld turns into a protective barrier around the material soon enough.


Sometimes the surface is so badly corrupted that you need to attach an extra overlay over it. Otherwise, they cannot be used at all. In such cases, primer can help but not that effective.

Going for a specialist or order, alternative steel is always just one call away. But doing it manually and keeping steel alive for years to years is something only an old man can value off properly.

Therefore, we hope you’ll find this guide favorable when the moment of need arrives with weld through primer!

Leave a Comment